64 OKIFAX 5250|Stopping a TransmissionTo stop a transmission in progress, follow the instructionsbelow.1 Press the Stop key twice. The display shows STOPPED.2 If documents are stuck partway through the documentfeeder, you may see a RELOAD DOCUMENT message onthe display. Press the Stop key again. Your fax machinefeeds the document the rest of the way through thedocument feeder.Shortcut Fax Number ProgrammingThis convenient feature lets you program a number into yourfax machine for future use while you’re sending a fax to it. Iteven finds the first available One Touch key (or Auto Dialnumber, if all the One Touch keys are programmed) for youto program.Use the following procedure:1 Load the document.2 Enter the fax number using the numerical keypad.3 Press the Copy key. The display shows ONE TOUCHNO.[xx].The number in brackets [xx] is the next unprogrammedOne Touch key number.If all the One Touch keys are programmed, the displayshows AUTO DIAL NO.[xx], with the number of the nextunprogrammed Auto Dial number shown in brackets [xx].4 Press Yes ß to program the location to the number shownorpress Search to cycle through the available unprogrammedkeys/numbers,then press Yes ß to program to the number you want.Press No © to stop the process.5 The display readsNO=5551212 [the fax number you entered] ID=.Press Start, then enter the location ID. This is a descriptivetitle up to 15 characters long. Refer to the instructionsbelow.