|Handbook 613 Your fax machine will grip the documents and pull thebottom page into the machine.4 To obtain the best possible quality for the type ofdocument you are scanning or faxing, use the Yes ß keyto set the resolution of your document. For most normaldocuments, the default STD setting works well.For normal office documents, use STD (Standard)resolution, which scans at 200 x 100 dpiFor documents with small type or other fine details, use• FINE resolution, which scans at 200 x 200 dpior• EX. FINE resolution, which scans at 200 x 400 dpiFor documents with photos or many shades of gray, usePHOTO resolution, which scans at 200 x 200 dpi5 If necessary, use the No © key to adjust the level ofcontrast in your document. For most documents, thedefault NORMAL setting works best.• For documents with normal contrast, use NORMALcontrast.• For documents that are too light, use LIGHT contrast.• For documents that are too dark, use DARK contrast.6 Your documents are now ready for faxing or copying.Sending a Fax to a Single Location1 Load your documents.2 Select a location. Refer to the instructions below.To dial using a One Touch keyPress the One Touch key.To dial using an Auto Dial numberPress the Auto Dial key, then enter the two-digit Auto Dialnumber on the numeric keypad.To dial using the numeric keypadDial as you would on a normal telephone.If you make a mistake, press the Yes ß key to go back andre-enter the number.Press the Start key when you have finished enteringnumbers.To dial using an external telephonePick up the handset of your external telephone and dial thenumber of the machine you wish to transmit to. If thereceiving fax machine is in automatic reception mode, you
