|Handbook 33key labeled with the function you want to use. Whileprogramming or selecting other functions, pressing theSelect Function key a second time takes you directly backto your fax machine’s standby mode.7 Auto Dial keyAuto Dial numbers are abbreviated numbers for rapiddialing. Rather than dialing the entire telephone number,you can enter a 2-digit Auto Dial number instead. You canalso use the Location IDs (names) associated with AutoDial numbers to search for these locations by name usingthe Search key.8 Redial keyPress this key to manually redial the last number dialed.9 Hook/V. Request keyPress this key to open a telephone line for manual dialing.You can hear the dialing through your fax machine’sspeaker.If you have an optional telephone handset or externaltelephone connected to your fax machine, you can also usethis key to initiate or answer a request for voicecommunication during a fax communication. Press thiskey while transmitting to signal the operator at the otherfax machine that you want to talk to him or her at the endof your transmission or after reception of any page hasbeen completed. To answer a voice request, press this keyafter lifting your telephone handset.10 One Touch keypadEach of the keys on this keypad can be programmed witha fax number. You can dial this number by pressing thecorresponding key. Refer to the “ Programming YourSpeed Dial Directory, One Touch Faxing“ section of thishandbook for details. The keys are also used to controland program fax machine functions.11 One Touch labelsAfter programming a location into a One Touch key, writethe location’s name on the One Touch label. Lift off theplastic cover above the One Touch label, use a pencil towrite in the name, then replace the cover.
