|Handbook 149User Function Settings02 MCF(MULTI-LOC.)This function automatically prints a Message ConfirmationReport after each multiple-location transmission. Thereport provides information about the transmission. Referto the “Reports, Message Confirmation Report” section ofthis handbook.Available settings are ON (default) and OFF.03 ERR REPORT (MCF)This function automatically prints a Message ConfirmationReport every time an error occurs during a transmission orpolling transmission operation. The report providesinformation about the transmission. Refer to the “Reports,Message Confirmation Report” section of this handbook.Available settings are ON (default) and OFF.User function settings allow you to customize the generaloperation of your fax machine. Refer to the following UserFunction Settings List to determine which settings you mayneed to change, then refer to the “Changing Your UserFunction Settings” part of this section to make the change.User Function Settings List01 MCF(SINGLE-LOC.)This function automatically prints a Message ConfirmationReport after each single-location transmission or pollingtransmission. The report provides information about thetransmission. Refer to the “Reports, MessageConfirmation Report” section of this handbook.Available settings are ON and OFF (default).