42 OKIFAX 5250|03 ERR REPORT (MCF)This function automatically prints a Message ConfirmationReport every time an error occurs during a transmission orpolling transmission operation. The report providesinformation about the transmission. Refer to the “Reports,Message Confirmation Report” section of this handbook.Available settings are ON (default) and OFF.04 IMAGE IN MCFWhen a message confirmation of a memory transmissionis printed, this function adds a portion of the first page ofthe document that was sent. This feature makes it easier toidentify a fax, but it may present security problems if youare sending sensitive documents.Available settings are ON (default) and OFF.User Function SettingsUser function settings allow you to customize the generaloperation of your fax machine. Refer to the following UserFunction Settings List to determine which settings you mayneed to change, then refer to the “Changing Your UserFunction Settings” part of this section to make the change.User Function Settings List01 MCF(SINGLE-LOC.)This function automatically prints a MessageConfirmation Report after each single-locationtransmission or polling transmission. The report providesinformation about the transmission. Refer to the “Reports,Message Confirmation Report” section of this handbook.Available settings are ON and OFF (default).02 MCF(MULTI-LOC.)This function automatically prints a MessageConfirmation Report after each multiple-locationtransmission. The report provides information about thetransmission. Refer to the “Reports, MessageConfirmation Report” section of this handbook.Available settings are ON (default) and OFF.