2.2 Handbook conventionsThe following conventions are used throughout this handbook when referring to:Type Example ConventionIcons The term "select" is used in procedures involving icons torefer to the action of selecting an on-screen icon, either usingtouch or physical buttons:• Touch — Press your finger on the icon to select.• Physical buttons — Use the Joystick to highlight theicon and press the Ok button.The term "select" is used in procedures involving menusto refer to the action of selecting a menu item, either usingtouch or physical buttons:• Touch — Press your finger on the icon to select.• Physical buttons — Use the Joystick to highlight theicon and press the Ok button.MenusThe term “scroll” is used in procedures involving menus anddialogs to refer to the action of scrolling a list or menu, eitherby touch or physical buttons:• Touch — Press your finger on the menu and slide up ordown to scroll.• Physical buttons — Turn the Rotary control clockwiseor anti—clockwise to scroll..Applications The term “select” is usedin proceduresinvolvingapplicationsto refer to the action of selecting a location, object or targeton-screen using touch or physical buttons:• Touch — Press and hold your finger on a location toselect, or• Touch — Press and release your finger on an object ortarget.• Physical buttons — Use the Joystick to highlight thelocation, object or target and press the Ok button.Numeric adjustcontrolsThe term “adjust” is used in procedures involving numericaladjust controls to refer to the action of changing the numericvalue using touch or physical buttons:• Touch — Press your finger on the up or down arrow toincrease or decrease the numeric value.• Physical buttons — Use the Rotary control to increaseor decrease the numeric value.Document and product information 17
