Using slider bar controlsSlider bar controls provide a graphical representationof numeric data and enables you to quickly changesetting values.123D12570-1ItemDescrip-tionNon—Touchoperation Touch operation1 CurrentvalueN/A N/A2 SlidercontrolUse the Rotarycontrol to adjustvalueSlide the slider Upor Down to adjustvalue.3 Auto Press Ok buttonto switch betweenAuto and manualadjustment.Select to switchbetween Autoand manualadjustment.Using control dialogsControl dialogs enable you to control externallyconnected equipment, such as an autopilot unit.The following diagram shows the main features ofa typical control dialog:D12279-2132Screen item Description1 Status — provides status information for theconnected equipment. For example, the PilotControl dialog displays the locked headingand current navigation mode for a connectedautopilot unit.2 Control icons — provide direct control ofthe connected equipment. For example, thePilot Control dialog Standby and Track iconsenable you to instruct a connected autopilotunit to perform specific functions.3 Close — Closes the control dialog.6.8 Basic touchscreen operationsPlacing and moving the cursor usingtouchTo place or move the cursor around the screen ona touchscreen multifunction display follow the stepsbelow.1. Touch the screen at any position on the screen toplace the cursor there.Touchscreen lockOn a multifunction display with HybridTouch you canlock the touchscreen to prevent accidental use.For example, locking the touchscreen is particularlyuseful in rough water or weather conditions.The touchscreen can be locked and unlocked fromthe homescreen. The touchscreen can only beunlocked using physical buttons.Locking the touchscreen - touch only displaysWhen a touch only display is paired with an optionalremote keypad the touchscreen can be locked.From the Homescreen:1. Select the Set-up icon.2. Select Touch-Lock so that On is highlighted.The touchscreen is now locked.Unlocking the touchscreen - touch only displaysTo unlock the touchscreen of a touch only displaywhen paired with a remote keypad follow the stepsbelow.From the Homescreen:1. Select the Set-up icon.2. Select Touch-Lock so that Off is highlighted.The touchscreen is now unlocked.Getting started 93
