4.22 Camera / Video connectionsA camera or a video device can be connecteddirectly your multifunction display using the videoconnector on the power and data cable or using thededicated Video / alarm connector.Examples of video sources that you can connect tothe display include:• Video camera.• Thermal camera.• DVD player.• Portable digital video player.Power / Data cable video inputD12914-11 2431. Multifunction display rear connector panel.2. Power and data cable.3. BNC video input connector .4. Video source (e.g. video camera).Video / alarm connector video inputD12915-13121. Video source (e.g. video camera).2. Multifunction display rear connector panel.3. Video / alarm cable (supplied).Note: To listen to a movie’s audio track, anyconnected DVD or digital video player will requirespeakers to be connected to the players audiooutput.4.23 HDMI video outputThe HDMI cable is used to output a gS multifunctiondisplay’s screen to an external display.D12916-13211. External display (See note below).2. Multifunction display rear connector panel.3. Raymarine 5 m (16.4 ft) HDMI video output cable(A80219)Note:1. The external display you are connecting tomust support the 720p standard to enable youto view the multifunction display screen on theexternal display. The multifunction display’svideo output resolution is fixed at 720p.2. The HDMI cable must only be connected to anexternal display that is electrically isolated fromthe vessel’s dc power supply (i.e the screenand the 0V of the external display’s HDMIconnector must not have a direct connectionto the vessel’s dc power supply).For further assistance please contact Raymarinetechnical support.Cables and connections 67
