22.8 Selecting a location to storerecordingsIn order to record, playback or capture a still imageof IP camera feeds you must select the location youwant to save to.If saving to a memory card ensure that a memorycard with sufficient space is inserted into the relevantcard reader slot.Note: Do not save files to cartography chartmemory cards.From the Camera application:1. Select Menu.2. Select Set-up.3. Select Save Files to:.4. Select the location from the list:• SD1• SD2• Internal (default)SD1 and SD2 will only be selectable if a memorycard is inserted into the relevant slot.Note: If your multifunction display only has 1 cardreader slot then only SD1 and Internal is displayed.22.9 Record and playbackThe Camera application can be used to record liveIP camera feeds from a connected IP camera. Therecording can then be played back at any time.The camera application records IP camera feeds in.mp4 format which can be saved to a memory cardor to the display’s internal storage.The Camera application titlebar displays the nameof the feed being recorded and a recording timer isdisplayed onscreen that shows the elapsed time.Recording an IP camera feedTo record the feed from an IP camera follow thesteps below.From the Camera application:1. Select Menu.2. Select Videos.3. Select Record.The recording will start.Whilst the camera application is recording you canuse your multifunction display as normal e.g. view adifferent camera feed, go back to the Homescreen,or open a different application. The selected feed willcontinue to record until stopped or until the memoryof the selected location is full.Note: On a touchscreen display you can also starta recording using the onscreen icons. Refer toOnscreen icons.Approximate record timesThe approximate record times are dependant on IPcamera resolution and settings, lighting conditionsand available storage space.A Raymarine® CAM200IP, set to factory defaultsettings can record at an approximate rate of 22.5MB per minute; allowing up to 44 minutes of recordtime per 1 GB of available storage space.Note: Recordings and images can be saved to theMFDs internal storage, refer to the Internal storagesection for approximate available storage.Stop recordingRecording can be stopped at any time.From the Camera application:1. Select Menu.2. Select Videos.Camera application 337
