6 * Upload Sonar Logs and Community edits tomobile device (Wi-Fi connection to MFD required)7 ** Upload Sonar Logs and Community editsanonymously to Navionics servers (internetconnection required)Note:* To participate in Navionics Sonar Charts, Sonarlogging must be enabled on your MFD. Sonar Logscan be enabled from the Chart application menu:Menu > Depth & Contour > Sonar Logs.** The Sonar logs shall be uploaded to Navionicsservers anonymously.To use this feature you must first:1. Download and install the Navionics MobileMarine app, available from the relevant appstore.2. Subscribe to Navionics Freshest Data.3. Download Freshest data to your mobile device.4. Enable Wi-Fi in the System Settings on the MFD.5. Enable Wi-Fi on your mobile device.6. Select the MFD Wi-Fi connection from the list ofavailable Wi-Fi networks on your mobile device.Navionics Freshest DataNavionics offer a 12 month subscriptions to theirFreshest Data service, which includes updates tonautical charts, sonar charts and community editslayer.Nautical charts — Navionics 2D charts.Sonar Charts — High definition bathymetry chartlayer created by combining multiple data sourcesincluding Sonar Logs provided by Navionicscommunity users.Community Edits — Edits made by Navionicsusers.To obtain Freshest Data insert your Navionicschart card into your PC, visit the Navionics websitewww.navionics.com and Click Downloads &Updates.18.3 Navigation optionsThe chart application provides features to helpnavigate to a chosen location.The navigation options are found in the Navigatemenu: Menu > Navigate• Pilot Controls — Accesses the Pilot ControlDialog, when Autopilot Control is enabled.• Goto Cursor — Will set the cursor position as theactive destination.• Goto Waypoint — Provides options to navigate toa waypoint stored on the system• Stop Goto — Stops the Goto Cursor or GotoWaypoint.• Stop Follow — Stops following the current route.• Restart XTE — Restarts the Cross Track Error.• Advance Waypoint — When following a route,skips to the next waypoint in the route.• Follow Route — Provides options to navigate to aroute stored on the system• Start Track / Stop Track — Will initiate a track onscreen to plot your course as you progress or stopa track that is currently being created.• Build Route — Provides options to build a route.Refer to Chapter 17 Waypoints, Routes and Tracksfor details on creating waypoints, routes and tracks.NavigationNavigating to a waypoint on the screenD11753-2From the chart or radar application:1. Select the waypoint.The waypoint context menu is displayed.2. Select the Goto Waypoint.Note: With an active waypoint selected you canselect Stop Goto option from the waypoint contextmenu at any time to cancel the action.Navigating to a waypoint using the waypointsgroup listFrom the Chart application:1. Select WPT.The waypoint menu is displayed.2. Select Waypoints.The waypoints group list is displayed.3. Browse the group list for the relevant waypoint.4. Select the waypoint.The waypoint options dialog is displayed.5. Select Goto.Chart application 225
