30.12 Bluetooth troubleshootingAspects of the installation can cause problems with the data shared between wireless devices. Suchproblems, their possible causes and solutions are described here.Problem Possible causes Possible solutionsEnsure that Bluetooth is enabled on the multifunctiondisplay ( Homescreen: > Set-Up > System Settings >Connections > Bluetooth > On).Ensure that the “Bluetooth” option is enabled on the iPhone(available from the phone's Settings / General menu).No wireless connection. iPhone does not havea Bluetooth connectionestablished with themultifunction display.Ensure that the Bluetooth device is paired with themultifunction display that you want to use it with. Todo this: Homescreen: > Set-Up > System Settings >Connections > New Bluetooth Connection.Media player device is notcompatible with the Bluetooth2.1+ EDR power class 1.5(supported profile: AVRCP 1.0)or higher.Check the Bluetooth compatibility with the devicemanufacturer. If the device is not Bluetooth 2.1+ EDRpower class 1.5 (supported profile: AVRCP 1.0) compatiblethen it is not suitable for wireless use with the multifunctiondisplay.No media player control.“Audio Control” is NOT enabledon the multifunction display.Enable “Audio Control” ( Homescreen: > Set-Up >System Settings > Connections > ConnectionsManager > Audio Control > On).Weak or intermittent Bluetoothsignal.Interference from other wirelessdevices in the vicinity.Multiple wireless devices running simultaneously (suchas laptops, phones, and other wireless devices) cansometimes cause wireless signal conflicts. Temporarilydisable each wireless device in turn until you haveidentified the device causing the interference.408 gS Series
