OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-67[217] TRAFFIC REPORT OPTIONThis MMC is used to print a traffic report and select options. The traffic report can beprinted on demand, or every hour, or at a programmed time each day, or for up to threeseparately-timed shifts. Automatic printing will always clear the totals.When report MANUAL PRINT OUT is selected, the options are:No Option Description0 PRINT AND CLEAR A report is printed and all totals are reset to 0.1 PRINTOUT ONLY A report is printed and all the totals are saved.2 CANCEL PRINTOUT Cancels printout.When AUTO PRINT OPTN is selected, the options are:No Option Description0 AUTO PRINT OFF Automatic print feature is disabled.1 DAILY A report is printed at a programmable time every day and all thetotals are reset to ‘0’.2 EVERY HOUR A report will be printed every hour.3 THREE TIME SHIFT Up to three separate Start and End times may be programmed toreport traffic within different shifts. A report is printed at the end ofeach End time and all totals are reset to ‘0’.When a report is printed, the totals represent call statistics accumulated from the date of thelast report stated as BEGINNING: D&T up to the date of this printout stated as ENDINGD & T.If there are no trunks in a group, the trunk group report for that group will not print.CONDITIONSIf this function is required in an OfficeServ 7000 Series system with an MCP card, youmust connect the LAN cable to the MCP card and be connected to a terminal supportingthe TCP/IP function.DEFAULT DATAAUTO PRINT OFF
