OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-11[105] STATION SPEED DIALAllows the system administrator or technician to assign phone numbers to a station’spersonal speed dial locations.CONDITIONSEach station may have up to 50 locations (or bins) assigned to it in MMC 606 (AssignSpeed Block). The speed dial bins are numbered 00~49. Each assigned phone numberconsists of a trunk or trunk group access code followed by a separator and up to 24 digits tobe dialed. These dial digits may consist of 0~9, * and #. If the system recognizes a validtrunk or trunk group access number, it will automatically insert the separator.DEFAULT DATANONEPROGRAM BUTTONSB Used to insert a flash code ‘F’C Used to insert a pause code ‘P’D Used to insert a pulse/tone conversion code ‘C’E Used to mask/unmask following digits (shows as ‘[’or ‘]’)F Used to enter name for speed dial bin (see MMC 106)ACTION DISPLAY1) Press Transfer button and enter 105.Display shows:[201] SPEED DIAL00:2) Dial station number. (e.g., 205)OR[205] SPEED DIAL00:Press Volume button to select station and press RightSoft button to move cursor.If selected station has no speed dial bins, the displaywill be as shown and a new station may be selected.[205] SPEED DIALSPDBLK NOT EXIST3) Dial location number. (e.g., 05)OR[205] SPEED DIAL05:_Press Volume button to select location and press RightSoft button to move cursor.
