OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-111[329] RING GROUPUp to five stations shall be able to be assigned to a ring group. When a master station isringing, the member stations of its ring group shall also be ringing simultaneously.If a master station can not be ringing because the forward, DND, or Lock function etc. isenabled, its member stations shall also not be ringing. However, if the master station isunplugged, its member stations shall be ringing.If an off hook ring occurs a master station due to a camp-on call which came in while itwas busy, its member stations shall also be ringing. If no off hook ring is ringing, they shallnot be ringing either.If the forward all, DND, or Lock function is enabled in a member station, it shall not beringing. However, if the forward busy or no answer function is enabled, this setting shall beignored.When a master or one of its member stations answers a call, other rings shall be cleared.MMC [329]MOBEX extension number cannot be assigned to Master of ring group.ACTION DISPLAY1) Press the Transfer button and 329. [2080]RING GROUPMEMBER 1: NONE2) Enter a desired station numberOR[2080]RING GROUPMEMBER 1: NONEPress the Volume button to select a desired phonenumber and press the Right soft button to move thecursor.3) Enter the number of a desired member stationOR[2080]RING GROUPMEMBER 1: 3001Select the number of a desired service by using theVolume button and move the cursor by using theRight Soft button.4) Press the Transfer button to complete the procedureor press the Speaker button to store the data.RELATED ITEMSProgram 857 Set virtual cabinet of MOBEXProgram 724 Set number plan of MOBEXProgram 328 Set MOBEX number