CHAPTER 2. MMC Programming2-246 © SAMSUNG Electronics Co., Ltd.[716] UK LCR OPTIONThis MMC provides UK LCR options.No Option Description0 NETWORK CODE This table is used to network access code when the call is routed tothe secondary network. This table contains up to 16 entries. Eachcode has 4 digits maximum in length and use option for None, CCC, PINor Both. (Default: all codes are empty and all use options are none)0 NONE: This code doesn’t use.1 CCC: This code uses with Call Cast Code (CCC).2 PIN: This code uses with PIN Code.3 BOTH: This code uses with PIN code and Call Cast Code.1 PIN CODE This table is used to PIN code when the call is routed to the secondarynetwork. This table contains up to 4 entries and each code has 10digits maximum in length. (Default: all tables are empty)2 CCC OPTION This is used to which number used for Call Cost Code.(Default: Station Number)0 STATION NUMBER: Station number uses for Call Cost Code.1 NONE: Do not use Call Cost Code.3 STATION PIN NO. This is assigned to PIN code table number for each station number.(Default: all stations are 1)DEFAULT DATASEE DESCRIPTIONACTION DISPLAY1) Press Transfer button and enter 716.Display shows:NETWORK CODE01: USE:NONE2) Enter option number 0-3.ORNETWORK CODE01: USE:NONEPress Volume buttons to select number and pressRight Soft button to move cursor.3) Enter number 0-16.ORNETWORK CODE02:_ USE:NONEPress Volume buttons to select number and pressRight Soft button to move cursor.4) Enter network access code via dial keypad. NETWORK CODE02:1234 USE:NONE
