CHAPTER 2. MMC Programming2-238 © SAMSUNG Electronics Co., Ltd.[712] LCR ROUTE TABLEThe LCR ROUTE TABLE is responsible for selecting a specific trunk group in thecompletion of an outward bound call. This table works in conjunction with LCR DIGITTABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE.After you dial a valid digit string, the system uses the LCR ROUTE TABLE to select aspecific predetermined trunk group. There is a maximum of 99 routes available.If more than one trunk group is available for call completion, the system uses the firstdesignated trunk group and then the succeeding trunk groups. If all trunk groups are busyin a selected route, call queue becomes active and allocates trunks as they become available.DEFAULT DATANONEACTION DISPLAY1) Press Transfer button and enter 712.Display shows:LCR ROUTE (01:1)C:1 G:NONE M:---2) Dial LCR ROUTE table number. (e.g., 05)ORLCR ROUTE (05:1)C:1 G:NONE M:---Press Volume button to selected table and press RightSoft button to move cursor.3) Dial TIME BAND index number 1-4. (e.g., 2)ORLCR ROUTE (05:2)C:1 G:NONE M:---Press Volume button to selected index and press RightSoft button to move cursor.4) Dial LCR COS number 1-8. (e.g., 4)ORLCR ROUTE (05:2)C:4 G:NONE M:---Press Volume button to selected COS and press RightSoft button to move cursor.5) Dial TRUNK GROUP access code. (e.g., 801)ORLCR ROUTE (05:2)C:4 G:801 M:---Press Volume button to selected access code and pressRight Soft button to move cursor.
