OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-199[603] ASSIGN TRUNK GROUPAllows the assignment of trunks to a specific trunk group or to several trunk groups. This isuseful in the programming of LCR when more than one trunk is to be in several dialingplans. There are two different modes of operation: (1) sequential and (2) distribute.There are 30 programmable trunk groups with up to 99 members per group. But in case ofOfficeServ 7100, it is possible to assign up to 60 members per group and there are 11programmable trunk groups.Trunk groupOne trunk can appear in more than one trunk group. If necessary, delete the trunkmember from other groups to prevent accidental access.No Item Description0 TYPE Specify the type of trunk group. This option has 7 kinds of values.MIXED TRUNK: default. Associated in various kind of trunk channelNORMAL TRKISDN TRKSIP TRKH.323 TRUNKSPNET TRUNKQSIG PRI1 MODE Select the way searching idle channel of trunk.2 MEMBER Trunk channel memberYou can input trunk channel corresponding trunk type. But in case ofMIXED TRUNK type, It’s possible to input different kind of trunkchannelDEFAULT DATAItem DescriptionTYPE / MEMBER 9 MIXED TRUNK/LOOP, BRI, PRI trunk800 MIXED TRUNK/E&M, B/W801 ISDN TRUNK/ISDN trunk803 SPNET TRUNK/VoIP Networking trunk804 H.323 TRUNK/H.323 trunk(H323 is not used in some OfficeServsystem.)805 SIP TRUNK/SIP trunkothers MIXED TRUNK/NONEMODE SEQUENTIAL