OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-179[506] TONE CADENCEProvides the ability to customize the tone cadence on a system-wide basis. The systemprovides 11 types of tone and three types of tone provided from Central Office or a PBXsystem can be detected.When changing the MMC [506]MMC [506] should not be changed from the default levels without the assistanceof the local SAMSUNG distributor.No Item Description00 BUSY TONE The called station is busy.01 CONFM/BARGE A feature has been successfully activated/cleared or a Barge-In withTone has been performed.02 DIAL TONE The system is ready to interpret key presses/dialed digits.03 DND/NO MORE The called station is in DND or has no free CALL buttons.04 ERROR TONE An error has been made.05 HOLD/CAMPON This is the system generated hold tone.06 MSGWAT TONE This is the tone heard at an SLT with a message waiting.07 RGBACK TONE The called station is ringing.08 RING TONE This is the tone heard from a ROP device or Loud Bell when thesedevices are called.09 TRANSFERTONEThis is the tone heard when the transfer button is pressed or an SLThook flashes.10 DID RNGBACK This is the tone heard by the outside party when they dial a DID number.11 CO BUSY This is used to detect the busy tone provided from Central Office or a PBXsystem.12 CO RINGBACK This is used to detect the ring back tone provided from Central Office orPBX system.13 CO DIAL This is used to detect the dial tone provided from Central Office or PBXsystem.
