CHAPTER 2. MMC Programming2-36 © SAMSUNG Electronics Co., Ltd.[119] CALLER ID DISPLAYAllows the technician to set the individual station display preference on a per-station basis.Caller ID or CLI (Command Line Interface), DDI can be selected to either show the name,number first, or no display depending on the type of call. Caller ID or CLI, DDI displayshave the following options:No Type Description0 RING LINE1 When incoming call is ringing, the specific information is displayed in theupper line of the phone display.NO DISPLAY Display trunk number only.And any information will not be displayed in thelower line of the phone display.CLI NUMBER FIRST According to priority, it displays CLI number orCLI name or trunk number. If the former is notvalid, the latter has a priority.CLI NAME FIRST According to priority, it displays CLI name or CLInumber or trunk number. If the former is notvalid, the latter has a priority.DDI NUMBER FIRST According to priority, it displays DDI number orDDI name. If the former is not valid, the latter hasa priority. If both are invalid, it operates as a CLINAME FIRST.DDI NAME FIRST According to priority, it displays DDI name or DDInumber. If the former is not valid, the latter has apriority. If both are invalid, it operates as a CLINAME FIRST.GROUP NAMEFIRSTIn case of group call, it displays ‘Call name>’ or ‘Call For 5000’. If not group call, itoperates as a CLI NAME FIRST.DDI NUMBER/NAME It displays ‘DDI NUMBER/DDI NAME’. It onlysupports up to 16 characters. If both are invalid,it operates as a CLI NAME FIRST.DDI NAME/NUMBER It displays ‘DDI NAME/DDI NUMBER’. It onlysupports up to 16 characters. If both are invalid,it operates as a CLI NAME FIRST.1 RING LINE2 When incoming call is ringing, the specific information is displayed in thelower line of the phone display.RING LINE2 has the same options as RING LINE1
