OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-267[725] SMDR OPTIONSAllows the system administrator to select the information printed on the SMDR report.The following options may be selected:No Option Default Description00 PAGE HEADER YES This option determines whether a page header will printat the top of each page. This would normally be turnedoff if SMDR is being sent to a Call Accounting machine.01 LINE PER PAGE 66 This option selects the length of each page to determinewhen to print the SMDR header. The number of lines isin the range 01-99.02 INCOMING CALL YES This option determines whether incoming calls will printon SMDR.03 OUTGOING CALL YES This option determines whether outgoing calls will printon SMDR.04 AUTHORIZECODEYES This option determines whether authorization codes willprint on SMDR. If this option is set to NO, ‘****’ is printedon SMDR.05 SMDR STARTTIMEYES This option determines whether valid calls will includethe minimum call time in total call duration.06 IN/OUT GROUP YES This option allows a message, IN GROUP or OUTGROUP, to be printed in the ‘digits dialed’ column eachtime a station enters or leaves a group.07 DND CALL YES This option allows a message, IN DND or OUT DND, tobe printed in the ‘digits dialed’ column each time astation enters or leaves DND.08 WAKE-UP CALL YES This option determines whether stations receiving analarm reminder call will print on SMDR.09 DIRECTORYNAMENONE This option allows the system administrator to enter aname up to 16 characters which will appear on theSMDR header.10 CALLER ID DATA YES This option can be selected to print Caller ID datareceived from the Central Office on incoming calls.This option requires the use of a 132-column widecarriage printer or an 80-column printer set forcondensed print.11 ABANDON CALL YES If this option is set to YES, unanswered calls for whichCID information was received will print on SMDR.13 NO. OF DIALMASK0 If this option is set to a numeric value, the selected lastdigits of the number dialed field will be masked asasterisks (*) on the SMDR print out. Maximum maskeddigits is 18. First 4 digits will not mask.