OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-391[840] IP PHONE INFORMATIONThis MMC provides a means to register IP phones with the OfficeServ 7000 Series system.During registration, the IP and MAC addresses are also registered. The User ID andPassword must match the table entry in this MMC for the IP phone to be registered.The system default phone numbers are 3201~3299 and default User IDs match the defaultstation numbers. The system default password is 1234. IP phones must be individuallyprogrammed with a User ID and Password in order to register with the system.No Option Description Default00 USER ID This is the ID the IP phone must match to registerwith the OfficeServ 7000 Series system.(alphanumeric)To register IP phone in PnP mode (plug and play),the MAC address of IP phone has to be entered inUSER ID option. And then IP phone has to dofactory reset.First 99 IP phonesare 3201~3299,others are EMPTY.01 USER PSWD This is the password the IP phone must have toregister with the OfficeServ 7000 Series system.(alphanumeric)‘1234’02 IP ADDR This is the IP address of the IP phone whenregistered with the system. (Read only)0.0.0.0.03 MAC ADDR This is MAC address of the IP phone whenregistered with the system. (Read only)FFFFFFFFFFFF04 SIG PORT This is the IP UDP port of the IP phone whenregistered with the system. (Read only) Thisinformation will be needed when traversing NATrouters, firewalls, etc.600005 VOICE PORT This is the IP RTP port of the IP phone whenregistered with the system. (Read only) Thisinformation will be needed when traversing NATrouters, firewalls, etc.900007 DSP TYPE This selects which CODEC this phone’s DSP will use.G.729A (low bandwidth) or G.711 (high bandwidth).This data uses IP phone to IP phone connectiononly; others follow MGI CODEC type.G.729A08 PHONE TYPE This is the type of IP phone used, SAMSUNG or SIP(future). Use SAMSUNG.SAMSUNG09 REGIST CLR This is used to clear the registration of a particularIP phone. This is similar to unplugging and pluggingin the phone and is useful for maintenance.NO10 FRAMECOUNTThis value determines the transmission interval timeof VoIP packets generated by the IP phone.This data uses MMC 841 ITP DSP PARA DOWN =PHONE DATA only. The range is 10~40 ms.20 ms
