CHAPTER 2. MMC Programming2-374 © SAMSUNG Electronics Co., Ltd.(Continued)No Parameter Description Default15 DTMF TYPE There are two types of DTMF transmission: INBAND,which is industry standard (H.245) type DTMF transport,and OUTBAND which is a Samsung proprietarymethod.OUTBAND16 TOS/DifServ An 8-bit binary value that will be used by externalrouters, switches, etc, (that optionally support TOS-bitprioritization) to identify the transport-priority value ofdata packets generated by the MGI card. This value canbe left at the default value (00000) if your networkinfrastructure does not support this method ofbandwidth management.All bits 017 G711 FRAME specify the transmission interval time of the VoIP packetfor G.711 codec20 ms18 G729 FRAME specify the transmission interval time of the VoIP packetfor G.719 codec20 ms19 G729s FRAME specify the transmission interval time of the VoIP packetfor G.729a codec20 ms20 G723 FRAME specify the transmission interval time of the VoIP packetfor G.711 codec30 msDEFAULT DATASEE DESCRIPTIONACTION DISPLAY1) Press Transfer button and enter 835.Display shows the first option.MGI6:AUDIO CODECG.7292) Enter MGI type (0-2) via dial keypad.ORMGI6:AUDIO CODECG.729Press Volume button to make selection and pressRight Soft button to move cursor.3) Enter MGI DSP parameter via dial keypad.ORMGI6:G729 FRAME20 MSPress Volume button to make selection and pressRight Soft button to move cursor.4) Enter MGI DSP parameter.ORMGI6:G729 FRAME40 MSPress Volume button to make selection and pressRight Soft button to save and return to step 3.
