CHAPTER 2. MMC Programming2-204 © SAMSUNG Electronics Co., Ltd.[606] ASSIGN SPEED BLOCKProvides a means of adding or deleting speed dial blocks to the system or an individualphone. With the ability to delete a block or blocks of speed dial, it will not be necessary towaste these on such items as voice mail, DPIMs (Door Phone Interface Modules) orstations that do not require the ability to use speed dial. The Free List will show how manybins are left to be assigned.The system list can have up to 500 numbers (or 950 numbers if set in MMC 861 SYSTEMOPTIONS) and each station can have up to 50 numbers. Speed dial numbers are assignedin blocks of 10. Each speed number may contain up to 24 digits.DEFAULT DATASYSTEM: 200 ENTRIESSTATIONS: 1 BLOCK ASSIGNEDACTION DISPLAY1) Press Transfer button and enter 606.Display shows:FREE LIST:20SYSTEM:202) Press Right Soft button to advance to next line.ORFREE LIST:20SYSTEM:20You can view BUSY LIST using Volume button. BUSY LIST:180SYSTEM:203) Make a selection of SYSTEM or EXT using Volumebutton and press Right Soft button to advance cursor.FREE LIST:20EXT201:14) Enter desired extension number via dial keypad.(e.g., 205)FREE LIST:20EXT205:1ORPress Volume button to make selection and pressRight Soft button to advance cursor.5) Enter valid number for bins.(e.g., 0-5 for EXT or 00-50 for SYSTEM)FREE LIST:20EXT205:5ORPress Volume button to make selection.ORPress Hold button to delete bin (s).6) Press Transfer button to save and exit.ORPress Speaker button to advance to next MMC.
