English 92 NAMES AND FUNCTIONS OF PARTSFront panel1. POWER indicatorLights up when the power is on.2. FULL indicator (JP.86)Flashes when the amount of available memory in the harddisk’s recording area drops to the percentage specified usingmenu settings.In addition, recording stops automatically when no morememory is available, and the FULL indicator switches to apermanently lit condition.The indicator can then be turned off by performing “AREAFULL RESET”.3. ERROR indicator (JP.17)This indicator flashes if the HDD or fan begins to malfunction.4. LOCK indicator (JP.118)Lights up when operations have been locked.The LOCK indicator turns off when the lock condition iscancelled.5. ALARM indicatorFlashes during alarm recording.The ALARM indicator lights up during pre-alarm recording.6. USB terminal (JP.57)Connects to a recordable CD/DVD drive or a USB memory.For compatibility, refer to the SANYO homepage.http://www.sanyosecurity.com/When the USB port on the rear panel is also connected at thesame time, only the front port will be used preferentially.7. [CAMERA SELECT] buttons and indicatorsWhen one or more cameras have been connected to theVIDEO IN terminals on the digital video recorder’s rear paneland the appropriate [CAMERA SELECT] button is pressed,the corresponding indicator lights up and the video feed fromthat camera is displayed on-screen.z During quad, multi 9, or multi 16 screen display:The indicators corresponding to the cameras beingdisplayed on the monitor light up.z During video loss:The indicator starts to flash.z If an alarm occurs:The indicator for the corresponding camera starts to flash.8. [FUNC.] buttonActivates dome camera operation mode. The operation ofother buttons changes. (JP.150) Use also for advancedmenu functions.9. [QUAD] button and indicator (JP.23)Displays video in quad screens. The indicator lights up whilein quad screen display.The indicator turns off when using a different screen displaymode.10. [MULTI] button and indicator (JP.24)Displays video in multi 9 or multi 16 screen display.The indicator lights up while in multi 9 or multi 16 screendisplay.The indicator turns off when using a different screen displaymode.The DSR-5709P can only display video in nine screens.11. [MON2] button and indicator (JP.26)If the [MON2] button is pressed while a monitor is connectedto the MON2 output terminal on the rear panel, it is possible tochange the monitor 2 video. The [CAMERA SELECT],[SEQUENCE] and [QUAD] buttons can be used. The indicatorlights up when this mode is selected.12. [PLUS] button (JP.24)Changes the video from a single camera to quad screen sizeduring multi 9, multi 16, full screen or quad screen display.For DSR-5709P, this operation is available when in multi 9,quad and full screen display.13. [MENU] button and indicatorDisplays the menu screens (i.e., setting screens), and theindicator lights up while any of these screens is beingdisplayed.SEARCH6 7 81 2 3 4 514 15 169 10 11 12 13MENUMENUEXIT/OSDZOOMSEQUENCE MARK/COPY SHUTTLE HOLDTIMER ALARMPLAY/STOPENTER AFIRISFOCUSSTILLREC/STOPPOWER FULL ERROR LOCK ALARMMULTIFUNC.TOURSEQUENCEAUTO PANUSBPLUSMON 2QUADPRESETJOGSHUTTLECLEARENTERPANZOOM/I/FOMENURESET1 2 3 4 579 811 1213 14 151716 182519 22 23 24 212026610DSR-5716P
