172 EnglishWATCHING IMAGES2INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATION(5) SAVE TO PC (Default setting: OFF)Set to “ON” to save live images or playback images to a PC.* Set only for full screen monitoring.z A user level 2 (LV2) or better is required to play backimages.z The user level required for saving images to a PC is set inthe user ID and network control settings. (JP.197, 128)z To be able to play back audio, install “DVR Viewer2” forstoring and playing back audio (JP.211), and then set“AUDIO” to “ON”.z Playback is performed with priority given to audio, and as aresult, images may not be displayed for certain hardwareand software configurations.z Audio playback is not available for quad screen or multiscreen (9/16 screen) display.z Due to certain PC performance levels and specifications, aportion of the video may not be displayed. In this case, goto [Tools]J[Internet Options]J[Temporary InternetFiles]J[Settings] in Internet Explorer, and then reduce[Amount of disk space to use].z When playing back a recorded image that does not haveaudio with “AUDIO” set to “ON”, the digital video recorderbegins buffering data and the status appears on thescreen. In this case, set “AUDIO” to “OFF”.z When short recordings are repeated, the digital videorecorder begins buffering data and continues to displaythat status. In this case, set “AUDIO” to “OFF”.(6) Image modeLIVE: Live modePLAY: Play mode(7) TimeLive mode: Displays the current time.Play mode: Displays the recording time.(8) NORMAL RECORDING MODEDisplays the current status for normal recording.z STOPz RECORDINGz TIMER STANDBYz TIMER RECORDINGz AREA FULL (in recording area)(9) ALARM RECORDING MODEDisplays the current status for alarm recording.z STOPz PRE ALARM RECORDINGz ALARM RECORDINGz AREA FULL (When recording area is full or automaticalarm copying is being performed and the archive areabecomes full, “AREA FULL” is displayed.)(10) Connection userDisplays the connection status for the various user levelswhen a number of different users are connected.Example: LV1: 4 LV2: 1 LV3: 1 LV4: 0The user ID for the current user is displayed in red.(11) PLAYBACK AREA (in the play mode screen only)The type of recording is displayed for the playback image.z ALARM (with alarm number displayed)z PRE ALARM (with alarm number displayed)z NORMALz ARCHIVE (with alarm number displayed)(12) SPEED (in the play mode screen only)Displays the playback speed and direction.(13) Load status of external expansion unitsWhen video recorded by expansion units (S-ATA) or RAIDunits is played back via network, the operation status of otherindividual users and each load are displayed:: Playing back with the digital video recorder.: Playing back through network.Color changes depending on load: blue (normal) J yellow(caution) J red (warning).(14) Audio recording display (for playback mode screenonly)The letter “A” is displayed when playback video has audiodata accompanied.Screen display itemsDisplay Playbackdirection Playback speedPLAY Forward NormalSTILL Paused PausedR.PLAY Reverse NormalCUE Forward Fast-forward playbackREVIEW Reverse Fast-rewind playbackSLOW Forward Slow playbackR.SLOW Reverse Slow reverse playback
