MONITORING VIDEO FROM A CAMERA2English 25The camera video on a full screen can be changedautomatically based on the camera number.1 Press the [SEQUENCE] button.The SEQUENCE indicator flashes and the displayed videochanges automatically based on the camera number.The current camera number indicator lights sequentially.z It is possible to specify the cameras for which automaticselection is to be carried out. (JP.73)2 Press the [SEQUENCE] button to endautomatic selection.Automatic selection ends and the display returns to thenormal screen.z Pressing a [CAMERA SELECT] button, the [QUAD] button,the [MULTI] button or [PLUS] button also ends automaticselection.1 Press the [QUAD] button.The QUAD indicator lights up and video from four separatecameras is displayed simultaneously.2 Press the [SEQUENCE] button.The four images on the quad screen automatically change inorder of cameras No. 1-4, 5-8, 9-12 and 13-16.On the DSR-5709P, the video changes automatically in orderof cameras No. 1-4, 5-8, 9-3, etc.3 Press the [SEQUENCE] button to returnto normal quad-screen display.Automatic selection ends and the display returns to thenormal quad-screen.Pressing the following buttons displays the respectivescreens:[CAMERA SELECT] J Full screen; [QUAD] J Quad screen;[MULTI] J Multi screen; [PLUS] J Plus screenz If all channels in a quad screen are not set yet in the screen, the screen is excluded from thedisplay change sequence in the SEQUENCE operation.z Automatic selection cannot be used with playback video.Automatic camera selectionSetting automatic full screen selection01-01-05 00:00:00 ENA01-01-05 00:00:00 ENA01-01-05 00:00:00 ENA01-01-05 00:00:00 EN A01020304Setting automatic quad-screen selection02010403QUAD01 0203 0411 1215 1607 08CH1 CH2CH3 CH4CH5 CH6CH7 - -- - - -- - - -- - - -- - - -
