72 EnglishINITIAL SET1INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATION4 Set the day and month for item 1.(1) Turn the shuttle dial clockwise.“--” (day) flashes.(2) Turn the jog dial to select “26” and then turn the shuttledial clockwise.“--” (month) flashes.(3) Turn the jog dial to select “10” and then turn the shuttledial clockwise.The cursor moves to “2”.5 Use the same procedure to set otherholidays.6 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.z If a day is selected in February, April, June, September orNovember that does not exist (see table below), this ischanged automatically to the last day of the month.Use the following procedure to specify four different timeperiods per day (for instance, early morning, morning,lunchtime and evening) to set up automatic screen selection,masking and motion sensor operations, and other operations.Use TIME PERIOD A and TIME PERIOD B to make operationsettings. For example, it is possible to set TIME PERIOD A forautomatic screen selection and TIME PERIOD B for themasking of monitor video using a gray pattern.Example: For DSR-5716P Morning to lunchtime: 6:00 to 11:00Cameras No. 2, 4, 5, 7, 10 and 16 are masked. Lunchtime: 11:00 to 13:00Cameras No. 1, 4, 6, 11, 12, 13 and 14 are masked. Lunchtime to evening: 13:00 to 20:00Automatic selection is performed for Cameras No. 1, 5, 9 and12. Evening to morning: 20:00 to 6:00Automatic selection is performed for Cameras No. 1, 8 and16.Month Non-existent dayDay changed to(last day of themonth)2 30, 31 294, 6, 9, 11 31 301. -----Holiday settingnumber DayMonth1. -----1. 26---1. 26-102. -----EXIT/OSDSetting time periods01 02 03 0413 14 15 1605 06 07 0809 10 11 121601 02 03 0413 14 15 1605 06 07 0809 10 11 12120105 090108 16
