114 EnglishGENERAL SET3INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONUse the following procedure to set a warning buzzer to soundfor alarms or when hard disk space becomes insufficient.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “3.GENERALSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “2.BUZZERSET” and then turn the shuttle dialclockwise.The screen is displayed.(1) ALARM (default setting: OFF)Sounds a buzzer when an alarm occurs.(2) DISK FULL (default setting: ON)Sounds a buzzer when overwriting is not permitted and thehard disk capacity becomes insufficient.(3) DISK ERROR (default setting: ON)Sounds a buzzer accompanied with a warning message,when an abnormal condition has occurred in the hard diskdrive.(4) LOCK WARNING (default setting: ON)Sounds a buzzer if a button is pressed while the security lockis on. Specifically, the buzzer sounds twice with an interval ofapproximately 0.5 seconds.(5) KEY IN (default setting: OFF)Sounds a buzzer when a button is pressed.(6) NON REC (default setting: OFF)Sounds a buzzer when recording is stopped.(7) DISK TEMPERATURE (default setting: ON)Sounds a buzzer accompanied with a warning message,when the temperature has exceeded a given value in the harddisk drive.z Setting is invalid with the hard disk in a RAID unit.z Select “OFF” if you use hard disks other than thosedesignated by SANYO, as this function may not properlywork on them.4 Turn the shuttle dial clockwise.“OFF” flashes for “ALARM”.5 Turn the jog dial to select “ON” or“OFF” and then turn the shuttle dialclockwise.The cursor moves to “DISK FULL”.[Settings] ( indicates default setting)6 Use the same procedure to set the otheritems to “ON” or “OFF”.7 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.z To stop a buzzer, press any button or turn either the jogdial or shuttle dial.Setting the buzzerMENU SET>ALARM : OFFDISK FULL : ONDISK ERROR : ONLOCK WARNING : ONKEY IN : OFFNON REC : OFFDISK TEMPERATURE: ON(1)(2)(3)(4)(5)(6)(7) Setting DescriptionOFF The buzzer does not sound when an alarmoccurs.ON The buzzer sounds when an alarm occurs. SET>ALARM : OFFDISK FULL : ONDISK ERROR : ONLOCK WARNING : ONKEY IN : OFFNON REC : OFFDISK TEMPERATURE: ON SET>ALARM : ONDISK FULL : ONDISK ERROR : ONLOCK WARNING : ONKEY IN : OFFNON REC : OFFDISK TEMPERATURE: ONEXIT/OSD
