120 EnglishGENERAL SET3INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONSettings are required when RS-485 terminal (A and B) isconnected with a system controller or other devices.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “3.GENERALSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “4.RS-485SET” and then turn the shuttle dialclockwise.The screen is displayed.4 Turn the shuttle dial clockwise.“19200” flashes for “DATA SPEED”.5 Turn the jog dial to select the “DATASPEED” setting and then turn theshuttle dial clockwise.The cursor moves to “STATUS INFO”.[Settings] ( indicates default setting)6 Turn the shuttle dial clockwise.“OFF” flashes for “STATUS INFO”.7 Turn the jog dial to select “STATUSINFO” and then turn the shuttle dialclockwise.The cursor moves to “ALARM INFO”.[Settings] ( indicates default setting)Setting RS-485MENU SET>DATA SPEED : 19200STATUS INFO : OFFALARM INFO : OFFADDRESS : 001 SET>DATA SPEED : 19200STATUS INFO : OFFALARM INFO : OFFADDRESS : 001Setting Description2400, 4800, 9600, 19200 Sets the data speed.Setting DescriptionON Status information is transmitted.OFF Status information is not transmitted. SET>DATA SPEED : 19200STATUS INFO : OFFALARM INFO : OFFADDRESS : 001 SET>DATA SPEED : 19200STATUS INFO : OFFALARM INFO : OFFADDRESS : 001 SET>DATA SPEED : 19200STATUS INFO : OFFALARM INFO : OFFADDRESS : 001
