154EnglishADVANCED MENU SET8INTRODUCTIONSETTINGSNETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONzTurn the shuttle dial during automatic panning, automaticcamera selection, or TOUR for manual panning and turnthe jog dial for manual tilt and to cancel automatic modes.zOperation is only possible for one camera.zWhen switching to another camera during automaticpanning, automatic camera selection, or TOUR, thefollowing operations are available only for the secondcamera. Automatic panning, automatic camera selection,and TOUR continue for the first camera.zWhen an alarm occurs during camera operation, the CHthat the alarm occurred on is displayed on the screen andcamera operation mode is canceled.zDepending on the connected camera, some functions donot operate even when buttons are pressed.Use the following procedure to synchronize the time using theInternet or an NTP server on a LAN.1Press the [MENU] button.The MENU indicator lights up and the is displayed.2Turn the jog dial to select“8.ADVANCED MENU SET” and thenturn the shuttle dial clockwise.The screen is displayed.3Turn the jog dial to select “5.TIMEZONE/NTP SET” and then turn theshuttle dial clockwise.The 4Turn the shuttle dial clockwise.“GMT Dublin, Lisbon, London” flashes.5Turn the jog dial to select the “TIMEZONE” setting and then turn the shuttledial clockwise.Set the time zone. Select the region where the digital videorecorder is installed.The cursor moves to “SYNC. WITH NTP SERVER”.[Settings] (indicates default setting)Time zone/NTP settingSettingDescriptionGMT-12 Eniwetok,KwajaleinGreenwich Mean Time -12hours, Eniwetok, KwajaleinMENUTIME ZONEGMT Dublin, Lisbon, LondonSYNC. WITH NTP SERVER : OFFNTP SERVER ADDRESS:0.0.0.0TIME TO SYNCHRONIZE: 01:00TIME ZONEGMT Dublin, Lisbon, LondonSYNC. WITH NTP SERVER : OFFNTP SERVER ADDRESS:0.0.0.0TIME TO SYNCHRONIZE: 01:00
