200 EnglishGENERAL SET4INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONz If settings are changed during network control, theconnection is terminated.z If a value other than “80” is set as the default value for theport, when specifying the URL, enter a colon (:) and thenthe port number after the IP address.For example, if the port number is set as “60001”, enterhttp://192.168.0.1:60001/5 Click [SAVE].The setting is saved.z If settings are changed during network control, theconnection is terminated.1 Click the button on the operationpanel.The “MAIN MENU” is displayed.2 Click “3. GENERAL SET”.The “GENERAL SET” screen is displayed.3 Click “8. NETWORK CONTROL SET”.The “NETWORK CONTROL SET” screen is displayed.4 Set “NETWORK STATUS” to “ON” or“OFF”.[Settings] ( indicates default setting)8. NETWORK CONTROL SETSetting DescriptionONDuring network connection, the message“NETWORK CONTROL” is displayed on themonitor connected to the digital video recorder.OFFThe message “NETWORK CONTROL” is notdisplayed on the monitor connected to the digitalvideo recorder even during network connection.NETWORK CONTROL SETSAVEOPERATION AUTHORITY CHANGE:ENHANCED:COPY/DOWNLOAD LV3, 4:CAMERA CONTROL LV2, 3, 4:NETWORK STATUSPICTURE QUALITY: ONNETWORK CONTROL : ON467895
