70 EnglishINITIAL SET1INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATION4 Turn the jog dial to select “YES” andthen turn the shuttle dial clockwise.Connected cameras are automatically detected.When detection is completed, the display returns to the screen.5 Press the [EXIT/OSD] button.The display returns to the normal screen.Use the following procedure to set a unique title for eachcamera so that these titles can be displayed on-screen.z Titles can be up to 10 characters in length per camera.The following characters can be used.z Letters: A to Zz Numbers: 0 to 9z Symbols: - : . / * _ (space)z Numbers can also be entered by using the [CAMERASELECT] buttons 1 through 9 or the [QUAD] button.z The display limits for monitor 2 camera title is 8 charactersfor multi 9 screen display and 6 characters for multi 16screen display.Example: Setting the title “HALL-1STFL” for Camera No. 3.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “1.INITIALSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “3.TITLE SET”and then turn the shuttle dial clockwise.The title setting field is displayed on the monitoring screen.The default setting is “-----01” (camera No.).4 Press the No. 3 [CAMERA SELECT]button.The video from Camera No. 3 is displayed on-screen.5 Turn the shuttle dial clockwise.The first character position in the title flashes.Setting camera titles[CAMERA SELECT] Buttons Characters that can be entered1 12 23 34 45 56 67 78 89 9QUAD 0CAMERA DETECT !EXIT/OSDMENUCAMERA NO.01 ________01CAMERA NO.03 ________03CAMERA NO.03 ________03