Sanyo DSR-5709P Instruction Manual

Also see for DSR-5709P: Brochure & specs Quick guide

Contents

Sanyo DSR-5709P Instruction Manual Manual pdf 194 page image

RECORD SET3English 193Audio can be recorded together with images during alarmrecording. Note, however, that since this audio data is alsostored in the recording area, the recording time for this areadecreases.6 Set “AUDIO RECORDING”.[Settings] ( indicates default setting)z The settings for audio recording are restricted by thesettings for “ALARM INTERLEAVE (Step 7)” as follows:ONLY/SW/ALL:Audio recording is enabled when “REC RATE (Step 8)” isset to 1 FPS or more.ALL (P-1 – 4):Audio recording is enabled when “REC RATE” for any oneof the program-registered cameras is set to 1 FPS or more.ONLY (P-1 – 4):Audio recording is disabled.z If audio recording is unavailable due to restrictions,“AUDIORECORDING” will be forcibly switched to “OFF”when you click the [SAVE] button even if it is set to “ON”.7 Set “ALARM INTERLEAVE” to thedesired recording pattern.[Settings] ( indicates default setting)z In the program mode, there is a time lag of approximatelyup to one second between the alarm occurrence and startof recording, depending on the setting values of therecording rate.8 Set “REC RATE” to the desiredrecording rate.[Settings] ( indicates default setting)z The letter “A” is displayed in front of recording rates thatcan be set for audio recording.z If “ALARM INTERLEAVE (step 7)” is set to program mode,you can not select a recording rate.“***FPS” is automatically displayed when you click [SAVE]button.z When only one camera is connected, recording isperformed at 25 FPS even if 50 FPS is set.z When two or more cameras are connected and 50 FPS isset, the actual recording rate is roughly the recording ratedivided by the number of cameras. (Example: When 4cameras are connected and the recording rate setting is 50FPS, the actual recording rate is 12.5 FPS)9 Set “DURATION” to the desired alarmrecording duration.[Settings] ( indicates default setting)Setting audio recordingSetting DescriptionOFF Audio is not recorded.ON Audio is recorded.Setting the alarm interleaveSetting DescriptionONLY Video is recorded only from cameras with analarm occurring.SWRecording is switched between video from acamera for which an alarm has occurred andvideo from all connected cameras.ALLFor all the connected cameras, video recordingstarts at the same time when any one of thecameras receives an alarm.ONLY (P-1)ONLY (P-2)ONLY (P-3)ONLY (P-4)When the camera registered in the programrecording setting receives an alarm, videorecording starts at a recording rate specified inthe program.z Specify a program you want to apply from “P-1 to P-4.”z Audio recording is not available.ALL (P-1)ALL (P-2)ALL (P-3)ALL (P-4)When any one of the cameras registered in theprogram recording setting receives an alarm,video recording starts at recording rate whichwas independently specified for each camera inthe program.z Specify a program you want to apply from “P-1 to P-4.”z Audio recording is available only when anyone of the cameras has a recording rate of 1FPS or more.Setting DescriptionA50, A25, A16.67, A12.5,A8.333, A6.25, A5, A4.167,A3.571, A3.125, A2.778,A2.5, A2.273, A1.923,A1.667, A1.471, A1.316,A1.19, A1.087, A1Recording is performed at theselected recording rate (unit:FPS). (Audio can be recorded.)0.5, 0.333, 0.25, 0.2, 0.1,0.05, 0.033Recording is performed at theselected recording rate (unit:FPS). (Audio cannot be recorded.)Setting Description5SEC, 10SEC, 20SEC,40SEC, 1MIN, 2MIN, 3MIN,4MIN, 5MIN, 10MIN, 15MINRecords for the set duration foreach alarm.CCRecords while an alarm isactivated (Recording continuesfor five seconds even if less thanfive seconds).