84 EnglishRECORD SET2INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATION7 Turn the shuttle dial clockwise.After the hard disk is initialized, the screenappears and the new recording capacity setting is applied.8 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.When “OVERWRITE” is set to “OFF” for recording conditionsand the recording areas become full, recording isautomatically stopped. In this case, overwrite permission canbe used to overwrite previous recordings.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “2.RECORDSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select“2.RECORDING AREA SET” and thenturn the shuttle dial clockwise.The screen is displayed.4 Turn the jog dial to select “AREA FULLRESET” under “RECORDING AREA”and then turn the shuttle dial clockwise.The screen is displayed.To perform “AREA FULL RESET” for the archive area, select“AREA FULL RESET” under “ARCHIVE AREA”.5 Turn the jog dial to select “YES” andthen turn the shuttle dial clockwise.Recordings can now be made to the recording area.6 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Setting overwrite permissionHDD INITIALIZING !EXIT/OSDMENUTOTAL CAPACITY : 1200GBINTERNAL HDD : 500GBEXTERNAL HDD : 700GBRECORDING AREA : 80 %AREA FULL RESET ->ARCHIVE AREA : 20 %AREA FULL RESET ->CAUTION: WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED !AREA FULL RESETARCHIVE AREAARE YOU SURE ?NOMOVE:JOG SELECT:SHUTTLETOTAL CAPACITY : 1200GBINTERNAL HDD : 500GBEXTERNAL HDD : 700GBRECORDING AREA : 80%AREA FULL RESET ->ARCHIVE AREA : 20%AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED !EXIT/OSD
