RECORD SET2English 85z When “AREA FULL RESET” is performed for“RECORDING AREA”, the recordings in the recording areaare overwritten.z When “AREA FULL RESET” is performed for “ARCHIVEAREA”, the recordings in the archive area are deleted.Use the following procedure to set whether to overwrite theold video with the new one or stop recording when the harddisk recording area becomes full. In the latter case, theremaining capacity is shown as a percentage on the operationdisplay. A setting can also be made so that the FULL indicatorflashes when the remaining capacity falls to a specificpercentage.Also set to copy images to the archive area manually (JP.53)or automatically copy only alarm recordings.Example: The recording areas and archive area are set soas not to perform overwriting.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “2.RECORDSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select“3.RECORDING CONDITIONS SET” andthen turn the shuttle dial clockwise.The screen is displayed.4 Turn the shuttle dial clockwise.“ON” flashes for “OVERWRITE” under “RECORDING AREA”.5 Turn the jog dial to select “ON” or“OFF” and then turn the shuttle dialclockwise.The cursor moves to “MODE” in “ARCHIVE AREA”.[Settings] ( indicates default setting)6 Turn the shuttle dial clockwise.“MANUAL COPY” flashes.Setting recording conditionsMENURECORDING AREAOVERWRITE : ONARCHIVE AREAMODE : MANUAL COPYREMAINING DISK WARNING : 1%AUTO DELETE : OFFSetting DescriptionOFF Recording is stopped when the normalrecording area becomes full.ONOverwriting automatically starts from thebeginning of the recording area when itbecomes full.RECORDING AREAOVERWRITE : ONARCHIVE AREAMODE : MANUAL COPYREMAINING DISK WARNING : 1%AUTO DELETE : OFFRECORDING AREAOVERWRITE : ONARCHIVE AREAMODE : MANUAL COPYREMAINING DISK WARNING : 1%AUTO DELETE : OFF
