134 EnglishSCREEN SET4INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONUse the following procedure to scroll through video from allcameras at a specified interval.The interval for automatic selection can only be set for fullscreen and quad display.Example: Automatic switching of the full-screen displayevery 5 seconds.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “4.SCREENSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “FULL” for“2.SEQUENCE SET” and then turn theshuttle dial clockwise.“1S” flashes for “FULL”.4 Turn the jog dial to set the interval to“5S” and then turn the shuttle dialclockwise.Automatic selection is set to an interval of 5 seconds.5 Use the same operation to set theswitching interval for quad screendisplay.“INDIV.” cannot be selected for “QUAD”.z The interval applies to all cameras on the main monitor andmonitor 2. To set the interval for each camera whendisplaying video at full screen, select “INDIV.” in step 4 andthen go to “MAIN/MON.2 MONITOR SET”.z The interval can be set anywhere between 1 and 30seconds.6 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Example: Setting the display interval of each camera’svideo for the main monitor and monitor 2.1 Make timer settings for “TIME PERIODA” and “TIME PERIOD B” on the PERIOD SET> screen. (JP.74)Specify “TIME PERIOD A” and “TIME PERIOD B”.2 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.Setting the interval and monitors forautomatic screen selectionMENU1.MULTI SCREEN : NORMALQUAD POSITION SET ->MULTI 9 POSITION SET ->MULTI 16 POSITION SET ->2.SEQUENCE SETFULL : 1S QUAD : 1SMAIN/MON.2 MONITOR SET ->3.MASK : OFFMASK SET ->4.COLOR LEVEL SET ->Setting the time period to switch the display onthe main monitor and monitor 21.MULTI SCREEN : NORMALQUAD POSITION SET ->MULTI 9 POSITION SET ->MULTI 16 POSITION SET ->2.SEQUENCE SETFULL : 5S QUAD : 1SMAIN/MON.2 MONITOR SET ->3.MASK : OFFMASK SET ->4.COLOR LEVEL SET ->EXIT/OSDMENU
