ADVANCED MENU SET9English 209Set when cameras with remote operation capability areconnected.Perform the following connections and set camera control touse in full screen display.Connections necessary for remote operation:z Connect coaxial control cameras to the VIDEO terminal.z Connect the Sanyo RS-485 control camera to the RS-485terminal (RJ-11).z Connect the other companies’ RS485/422 control camerato the 2ND RS485/422 terminal.1 Click the button on the operationpanel.The “MAIN MENU” is displayed.2 Click “8. ADVANCED MENU SET”.The “ADVANCED MENU SET” screen is displayed.3 Click “2. CAMERA CONTROL SET”.The “CAMERA CONTROL SET” screen is displayed.The DSR-5709P displays only nine channels.4 Set “PROTOCOL” to the protocolcorresponding to the dome camera.[Settings] ( indicates default setting)5 The address (000 to 127) is displayed in“ADD”.When “SANYO RS485” or “2ND RS485/422” is specified asthe protocol, the address is displayed automatically.6 To “ACTION”, specify an interlockingbehavior of camera to be exhibitedwhen an alarm is detected.You can control the behavior of the camera such as alarm-triggered lens orienting, and pan and tour movement.[Settings] ( indicates default setting)z For “PRESET”, you can set “PRESET2-9” with DSR-5709Pand “PRESET2-16” with DSR-5716P.z Actually available actions depend on each camera. Formore information, refer to the camera's instruction manual.7 Use the same procedure to set the otherchannels.8 Set “2ND RS-485/422 PROTOCOL”.[Settings] ( indicates default setting)OFF, BBV, KALATEL, PELCO, SENSORMATIC9 Set “DATA SPEED”.[Settings] ( indicates default setting)9600bps, 4800bps, 2400bps10 Click [SAVE].The setting is saved.2. CAMERA CONTROL SETSetting DescriptionOFF No protocolSANYO RS485 SANYO RS485BBV COAX BBV COAX(Also supports AUX commands.)PELCO COAX PELCO COAX2ND RS-485/422 2ND RS-485/422COAX (H-SSP) COAX (H-SSP)5 481069Setting DescriptionOFF No action triggered.PRESETMoves the camera lens to the anglecorresponding to your selected presetnumber.PAN Starts automatic panning.TOUR Starts tour.SEQUENCE Starts sequence.
