PREPARING FOR USE1English 214 Turn the jog dial to select “01” and thenturn the shuttle dial clockwise.“01” flashes (indicating the day).5 Turn the jog dial to select “26” and thenturn the shuttle dial clockwise.The day is set to “26” and the month “01” flashes.6 Use the same procedure to set themonth (01), year (2007), hour (08) andminute (30).When the minutes are set, the cursor moves to the next item.z The day of the week is set automatically.z The clock stops during date and time settings.z The clock starts counting from 00 seconds.7 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.The hard disk contains a recording area and an archive area.Refer to P.82 for operations.Hard disk recording areas[A] Recording area[B] Archive areaz If the memory allocations for the hard disk recording areasare changed after recording, all stored recordings aredeleted and the hard disk is initialized; accordingly, specialcare should be taken. (JP.82)z The total hard disk capacity displayed on the menu screenmay differ from the actual hard disk capacity.Hard disk archive area [KEY]ENGLISH SET>01-01-2007 MON 00:00:00 TIME SET>MODE : USEWEEK MONTH TIMEON LST-SUN 03 02:00OFF LST-SUN 10 02:00 SET>ADJUST. TIME 01:0026-01-2007 FRI 00:00:0026-01-2007 FRI 08:30:00EXIT/OSDTOTAL CAPACITY : 1500GBINTERNAL HDD : 500GBEXTERNAL HDD : 1000GBRECORDING AREA : 80 %AREA FULL RESET ->ARCHIVE AREA : 20 %AREA FULL RESET ->CAUTION: WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED ![B] Archive area[A] Recording areaHard disk recorder internalhard disk capacity displayHard disk recorderexternal hard diskcapacity displayRecordingmode Recording methodNormalrecording ManualWhen monitoring, recording isperformed by pressing the [REC/STOP] button.Timerrecording Automatic Recording is carried out inaccordance with timer settings.Alarmrecording AutomaticRecording is carried out when alarmrecording is set to “ENABLED”.Alarm images are recorded inresponse to either the operation of aswitch connected to an ALARM INterminal or to the detection of anintruder via motion sensors.Pre-alarmrecording AutomaticWhen pre-alarm recording is set to“ON”, it is possible to record videofrom before the occurrence of analarm based on the correspondingsettings.Recordingmode Recording methodCopyManualorAutomaticThis area is used to store importantvideo data copied from the normalrecording area and/or alarmrecording area. Changes can bemade to the recording area todetermine the capacity. (1% - 99% )AB80%80%80%202020%RecordingareaArchive area
