NETWORK CONTROL2English 163z When the maximum number of PCs (15) is connected tothe digital video recorder and then an upper-level useraccesses the unit from a different PC, the most recentlower-level user is automatically disconnected and priorityis given to the upper-level user.An error message is displayed on the PC of thedisconnected user. (JP.164)z If entry of an incorrect password is repeated or [Cancel] isclicked, [AUTHENTICATION ERROR] displayed.z If a user clicks a restricted button during computer control,the password input screen is displayed to verify therequired user level.4 Select a language and click [OK].The operation screen is displayed and computer control isnow enabled.z A connection may not be possible via a proxy server. Inthis case, cancel the proxy settings.z Due to certain PC performance levels and specifications, aportion of the video may not be displayed. In this case, goto [Tools] J [Internet Options] J [Temporary Internet Files]J [Settings] in Internet Explorer, and then reduce [Amountof disk space to use].1 Click the button on the operationscreen of the PC.The connection is cancelled and control rights are returned tothe unit.z To forcibly cancel PC access from the unit, press and holdthe [SHUTTLE HOLD] button for at least 3 seconds.z Access from the PC is not permitted for a period of 10seconds after access is cancelled.z The access connection is also cancelled and control rightsthen switch back to the unit whenever communication withthe PC is not possible for a period of about 1 minute ormore.z If the browser is closed without clicking the button,approximately 1 minute is required before reconnection ispossible.Messages related to the switching of control or the networkconnection status may be displayed on-screen at any time. When control rights are switched to the PC“NETWORK CONTROL” is displayed on the monitor.The “NETWORK CONTROL” message is displayed whenconnected to a network, regardless of whether control isperformed from the PC or the digital video recorderz The “NETWORK CONTROL” message is not displayedwhen the network control setting (JP.128) connectiondisplay is set to “OFF” using the unit’s setting menu.DisconnectingMessages displayed when connectedDisplay on the unit0201-01-07 00:00:00 REC REPEAT EN A ALARM 0000000NETWORK CONTROLNETWORK CONTROLNETWORK CONTROL
