26 EnglishMONITORING VIDEO FROM A CAMERA2INTRODUCTION SETTINGS NETWORKCONTROLNETWORKOPERATIONNETWORKSETTINGSOTHEROPERATIONIf you connect a monitor to the MON2 output terminal on therear panel of the digital video recorder, you can view video inquad-screen and also allow screen to change automaticallyregardless of the display status on the main monitor. Inaddition, it is also possible to display video on monitor 2automatically from any camera for which an alarm hasoccurred. By default, automatic full screen selection isperformed.Use the [MON2] button to change the monitor 2 setting.z The playback image cannot be viewed on Monitor 2.1 Press the [MON2] button.The MON2 indicator lights up.z Monitor 2 is not available while a menu screen is beingdisplayed, search menu is being operated or camera isbeing controlled.Example: Selecting Camera 42 Press the No. 4 [CAMERA SELECT]button.The video from Camera No. 4 is displayed in full screen onmonitor 2.2 Press the [QUAD] button.The video from cameras No. 1 through 4 is displayed in quadscreen on monitor 2.3 To view video from another camera,press the [QUAD] button again.Each time this button is pressed, the four images on the quadscreen change, in order of cameras No. 1-4, 5-8, 9-12 and 13-16.On the DSR-5709P, the images change in order of camerasNo. 1-4, 5-8, 9-3, etc.4 To return to full screen display, press a[CAMERA SELECT] button.-On the DSR-5709P, press the [CAMERA SELECT] 1-9button.Viewing on monitor 2Viewing on a full screen[MON2] buttonMON20306010907 080401-01-07 00:00:00Monitor 2 Main monitorViewing on a quad screenQUAD0306010907 080401-01-07 00:00:0001030204Monitor 2 Main monitor06050807QUAD
