PLC-WM5500/WM5500L Expand Serial Command Functional Specifications14/886 Status Read Command Table6.1 Image Status Read Command TableStatus Read command ItemCR_BRIGHT [CR] Get value of BrightnessCR_CONT [CR] Get value of ContrastCR_COLOR [CR] Get value of ColorCR_TINT [CR] Get value of TintCR_SHARP [CR] Get value of SharpnessCR_GAMMA [CR] Get value of GammaCR_WBAL-R [CR] Get Red value of White BalanceCR_WBAL-G [CR] Get Green value of White BalanceCR_WBAL-B [CR] Get Blue value of White BalanceCR_COLTEMP [CR] Get value of Color temperatureCR_OFFSET-R[CR] Get Offset RedCR_OFFSET-G[CR] Get Offset GreenCR_OFFSET-B[CR] Get Offset BlueCR_NZRED [CR] Get setting status of Noise reductionCR_PROGV [CR] Get setting status of Progressive scanCR_IMAGE [CR] Get Selected Image statusCR_IMGGMD [CR] Get setting value of Image Gamma6.2 PC Adjust Status Read Command TableStatus Read command ItemCR_FSYNC [CR] Get setting value of Fine SyncCR_TDOTS [CR] Get setting value of Total DotsCR_CLPPHASE [CR] Get setting value of Clamp phaseCR_H-POS [CR] Get setting value of Horizontal PositionCR_V-POS [CR] Get setting value of Vertical PositionCR_DDOTS [CR] Get setting value of Display DotsCR_DLINE [CR] Get setting value of Display LineCR_ORGMODE [CR] Get the original signal for PC-Adjusted modeCR_PCSTORE [CR] Get status Free/ Stored for PC Adj. mode 1-10CR_SETPCADJ [CR] Get currently displayed PC signal in system6.3 Video Status Read Command TableStatus Read command ItemCR_SERSYS [CR] Get currently selected signal. In Auto mode, it returns aresult by Auto detection.6.4 Input Status Read Command TableStatus Read command ItemCR_INPUT [CR] Get selected InputCR_SOURCE [CR] Get selected SourceCR_SRCINP1 [CR] Get selected source for Input 1CR_SRCINP2 [CR] Get selected source for Input 2CR_SRCINP3 [CR] Get selected source for Input 3CR_SRCINP4 [CR] Get selected source for Input 4CR_SYSTEM [CR] Get selected system in current Input modeCR_SYSLIST [CR] Get possible system listCR_MODELIST [CR] Get possible mode listCR_HMSLOT [CR] Get total number of InputsCR_NMSLOT1 [CR] Get terminal information of Input1.CR_NMSLOT2[CR] Get terminal information of Input2.CR_NMSLOT3[CR] Get terminal information of Input3CR_NMSLOT4[CR] Get terminal information of Input4.