Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

Contents

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications62/889.5.9 CR_PCSTORE CommandCommand “CR_PCSTORE” [CR]DetailsGet Free or Stored status of MODE1 - 10 in PC Adjust.Data consists of 10 bytes and each byte represents MODE1-10.(F:Free, S:Stored)Acceptable “000_%1” [CR]%1“FFFFFFFFFF” ---------------- ALL Free“SFFFFFFFFF” --------------- Mode1 is Stored, others are Free:“FFFFFFFFFS” --------------- Mode10 is Stored, others are Free“SSSSSSSSSS” ------------- ALL StoredResponseUnacceptable “Error Code” [CR]9.5.10 CR_SETPCADJ CommandCommand “CR_SETPCADJ” [CR]Details Get PC signal for current systemAcceptable “000_%1” [CR]%1When input signal is PC Analog;“VGA1” ------------------------ Indicates VGA1 is selected“VGA2” ------------------------ Indicates VGA2 is selected::“XGA1” ------------------------ Indicates XGA1 is selected::“WXGA3” --------------------- Indicates WXGA3 is selected“1080I” ------------------------ Indicates 1080i is selected“1035I” ------------------------ Indicates 10350i is selected“720P” ------------------------- Indicates 720p is selected“575P” ------------------------- Indicates 575p is selected“480P” ------------------------- Indicates 480p is selected“575I” -------------------------- Indicates 575i is selected“480I” -------------------------- Indicates 480i is selected“1080PSF/24” ----------------- Indicates 1080psf/24 is selected“1080PSF/25” ----------------- Indicates 1080psf/25 is selected“1080PSF/30” ----------------- Indicates 1080psf/30 is selected:“MODE10” ------------------- Indicates Mode10 is selected“EXT11” ---------------------- EXT11 is selected:“EXT60” ---------------------- EXT60 is selected* Error Code “101” [CR] is returned for no signal.* When input signal is not PC Analog, error code “101” isreturned.ResponseUnacceptable “Error Code” [CR]