PLC-WM5500/WM5500L Expand Serial Command Functional Specifications70/889.8 Screen Status Read Command9.8.1 CR_SCREEN CommandCommand “CR_SCREEN” [CR]Details Get selected screen image sizeAcceptable “000_%1” [CR]%1“NORMAL” ---------------------- Normal mode“FULL” --------------------------- Full screen mode“WIDE” --------------------------- Wide(16:9) mode“TRUE” --------------------------- True mode“ZOOM” --------------------------- Zoom mode“NATURAL” ---------------------- Natural mode“CUSTOM” ----------------------- Custom modeResponseUnacceptable“Error Code” [CR] --- When command is not available in thegiven condition (such as being selected input).“?” [CR] --- When unknown command is received9.8.2 CR_VSCALE CommandCommand “CR_VSCALE” [CR]Details Get setting status of V scaleAcceptable “000_%1” [CR]%1 “-32” ”035”ResponseUnacceptable “Error Code” [CR]9.8.3 CR_VPOS CommandCommand “CR_VPOS” [CR]Details Get setting status of V PositionAcceptable “000_%1” [CR]%1 “-15” ”015”ResponseUnacceptable “Error Code” [CR]9.8.4 CR_HSCALE CommandCommand “CR_HSCALE” [CR]Details Get setting status of H scaleAcceptable “000_%1” [CR]%1 “-32” ”035”ResponseUnacceptable “Error Code” [CR]9.8.5 CR_HPOS CommandCommand “CR_HPOS” [CR]Details Get setting status of H PositionAcceptable “000_%1” [CR]%1 “-15” ”015”ResponseUnacceptable “Error Code” [CR]
