Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

Contents

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications36/888.7.10 CF_CORNER-UR CommandCommand “CF_CORNER-UR_%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the top-right corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceedingthe correction limit,Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.7.11 CF_CORNER-DL CommandCommand “CF_CORNER-DL%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the bottom-left corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceedingthe correction limit,Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.7.12 CF_CORNER-DR CommandCommand “CF_CORNER-DR_%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the bottom-right corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceedingthe correction limit,Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]