PLC-WM5500/WM5500L Expand Serial Command Functional Specifications40/888.10 Setting Command8.10.1 CF_LANG CommandCommand “CF_LANG_%1” [CR]%1“ENG” --------------------------- Select ENGLISH“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“JPN” --------------------------- Select Japanese“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“RUS” --------------------------- Select RussianDetailsSet language for OSD (Available only in the normal Power ON status)The language set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.2 CF_MENUPOSITION CommandCommand “CF_MENUPOSITION_%1” [CR]%1 “SET” ------------------ Move the menu display to next positionDetailsChange the menu position(Available in normal Power ON status only).The position set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFF.Position: center – bottom left – bottom right – top left – top right – center – …Menu display appears with the first command when menu display is not shown onthe screenAcceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.3 CF_INPUTBUTTON CommandCommand “CF_INPUTBUTTON_%1” [CR]%1“MODE1” ------------------------- Set Input button operation to MODE1“MODE2” ------------------------- Set Input button operation to MODE2“MODE3” ------------------------- Set Input button operation to MODE3DetailsSet Input button operation mode. (Available in normal Power ON status only).The status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFAcceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]