PLC-WM5500/WM5500L Expand Serial Command Functional Specifications41/888.10.4 CF_DISP CommandCommand “CF_DISP_%1” [CR]%1“ON” ----------------------------- Set Display to On“CNTDWNOFF” --------------- Set Display to Count down Off“OFF” --------------------------- Set Display to Off“UP” --------------- Switch forward (On → Count down Off → Off → On → ---)“DN” --------------- Switch backward (On → Off → Count down Off → On → ---)DetailsSet Display mode.(Available only in the normal Power ON status)The value set by this command is stored in EEPROM and setting remains effectiveeven after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.5 CF_BACKGND CommandCommand “CF_BACKGND_%1” [CR]%1“BLUE” -------------------- Select Blue Back“USER” ------------------- Select User“BLACK” ------------------ Select Black Back“UP” ---------- Switch forward (Blue Back→User→Black Back→Blue Back)“DN” --------- Switch backward (Blue Back→Black Back→User→Blue Back)DetailsSet Screen status for no signal.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and the setting remainseven after the power is turned to ALL OFF status.*When 1=”USER” is received, error code “101” is returned, in the case ofCapture non-practice.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]