PLC-WM5500/WM5500L Expand Serial Command Functional Specifications82/889.11.31 CR_PTIMEMODE CommandCommand “CR_PTIMEMODE” [CR]Details Get setting status of count up/down mode in P-timerAcceptable “000_%a” [CR]%1 “COUNTUP” -------------------- Set P-timer to Count up mode“COUNTDN” -------------------- Set P-timer to Count down modeResponseUnacceptable “Error Code” [CR]9.11.32 CR_PTIMER CommandCommand “CR_PTIMER” [CR]Details Get setting status of P-timerAcceptable “000_%a” [CR]%1“ON” -------------------- P-timer is activated“STOP” ---------------- P-timer is temporarily suspended“OFF” ------------------ Exit P-timer functionResponseUnacceptable “Error Code” [CR]9.11.33 CR_PTIME CommandCommand “CR_PTIME” [CR]Details Get setting time for count down mode of P-timerAcceptable “000_%a” [CR]%1 “001” – “180” ----------------------- 1 to 180 minutesResponseUnacceptable “Error Code” [CR]9.11.34 CR_KEYDIS CommandCommand “CR_KEYDIS” [CR]Details Get status of RC/KEY (valid or invalid)Acceptable “000_%1” [CR]%1“NONE” -------------------------- RC and KEY, both are valid“RC” ------------------------------- RC is invalid“KEY” ----------------------------- KEY is invalidResponseUnacceptable “Error Code” [CR]9.11.35 CR_SECURITY CommandCommand “CR_ SECURITY” [CR]Details Get ON/OFF setting status of Security on menu.Acceptable “000_%1” [CR]%1 “ON” ------------ PJ is locked“OFF” ----------- PJ is not locked.ResponseUnacceptable “Error Code” [CR]
