Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

Contents

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications35/888.7.7 CF_KEYSTONE CommandCommand “CF_KEYSTONE _%1” [CR]%1“UP” ------------- Correct Keystone distortion to reduce upper part of image“FUP” ----------- Correct Keystone distortion to reduce upper part by 2 steps“DN” ------------- Correct Keystone distortion to reduce lower part of image“FDN” ----------- Correct Keystone distortion to reduce lower part by 2 steps“LEFT” ---------- Correct Keystone distortion to reduce left part of image“FLFT” ---------- Correct Keystone distortion to reduce left part by 2 steps“RIGHT” -------- Correct Keystone distortion to reduce right part of image“FRGT” --------- Correct Keystone distortion to reduce right part by 2 steps“RST” ----------- Return Keystone and Corner to default settingDetailsChange level of Keystone distortion correction (Available only in the normalPower ON status).When reached the limit of the correction level, projector accepts the commandbut does not execute it. Receiving this command immediately invokes theoperation. When trying to set the value beyond available range, error code“201” is returned and the operation is not executed.Example 1: When the correction level of the right part has reached its upperlimit and then the command “RIGHT” is receivedExample 2: When the upper part correction allows only another step, and thenthe command “FUP” is received.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.8 CF_KYSTONMODE CommandCommand “CF_KYSTNMODE _%1” [CR]%1 “STR” --------- Set Keystone store mode to Store“RST” --------- Set Keystone store mode to ResetDetails Set Keystone or Corner store mode(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.9 CF_CORNER-UL CommandCommand “CF_CORNER-UL_%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the top-left corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceedingthe correction limit,Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]