Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

Contents

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications43/888.10.9 CF_PIPMAININP CommandCommand “CF_PIPMAININP_%1_%2” [CR]%1“1” -------------------- Select Input 1“2” -------------------- Select Input 2“3” -------------------- Select Input 3%2“ANALOG” --------------- Select Analog Input“VIDEO” ------------------- Select Composite Video Input“S-VIDEO” ---------------- Select S-Video input“YPBPR” ------------------ Select Y/Pb/Pr Input“YCBCR” ------------------ Select Y/Cb/Cr Input“SCART” ------------------ Select SCART Input“HDMI” -------------------- Select HDMI InputDetails Select input and source of Main picture of “Picture in Picture”. (Valid only when inthe normal Power ON status.)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.10 CF_PIPSUBINPU CommandCommand “CF_PIPSUBINP_%1_%2” [CR]%1“1” -------------------- Select Input 1“2” -------------------- Select Input 2“3” -------------------- Select Input 3%2“ANALOG” --------------- Select Analog Input“VIDEO” ------------------- Select Composite Video Input“S-VIDEO” ---------------- Select S-Video input“YPBPR” ------------------ Select Y/Pb/Pr Input“YCBCR” ------------------ Select Y/Cb/Cr Input“SCART” ------------------ Select SCART Input“HDMI” -------------------- Select HDMI InputDetails Select input and source of Sub picture of “Picture in Picture”. (Valid only when inthe normal Power ON status.)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.11 CF_PIPSIZE CommandCommand “CF_PIPSIZE_%1_%2” [CR]%1“1” -------------------- Set main picture size to 10%“2” -------------------- Set main picture size to 20%“3” -------------------- Set main picture size to 30%“4” -------------------- Set main picture size to 40%“5” -------------------- Set main picture size to 50%“6” -------------------- Set main picture size to 60%“7” -------------------- Set main picture size to 70%“8” -------------------- Set main picture size to 80%“9” -------------------- Set main picture size to 90%“10” ------------------ Set main picture size to 100%%2“1” -------------------- Set sub picture size to 10%“2” -------------------- Set sub picture size to 20%“3” -------------------- Set sub picture size to 30%“4” -------------------- Set sub picture size to 40%“5” -------------------- Set sub picture size to 50%Details Set display size of “Picture in Picture”. (Valid only when in the normal Power ONstatus.) *When “Picture in Picture” is set to Off, return “101” [CR]Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]