7 - Internal effect processor—Effect types7–37.2.3 Storing an edited effect1 Press the EFFECT key in the Library section(not the EFFECT key in the Mixer section).2 Make sure that the central lower part of thescreen is pointing towards the right. If it isnot, turn the SHUTTLE wheel clockwise, sothat it reads LIST SCROLL (notCHAR SELECT).3 Use the JOG dial to select an unused effectmemory location, or a memory locationwhich can be overwritten with the new editedvalues.4 Move the cursor to the on-screen STOREbutton, and press ENTER.If the memory location in which you are stor-ing the new effect already contains an effect,a popup window will ask you for confirma-tion that you want to overwrite the existingdata.You cannot overwrite any of the preset read-only memories.5 Naming of effects is done using the libraryscreen, as described in the section on libraryfunctions.Delay Delay type Delay time Feedback level Feedback delay timeValues Stereo, Ping-pong, Multi-tap 0 –1000 (ms) 0 – 100 (%) 0 – 1000 (ms)Chorus Rate Depth Pre-delay Feedback levelValues 0.1– 12.0 (Hz) 0 – 127 0 – 100 (ms) 0 – 100 (%)Flanger Rate Depth Resonance Delay timeValues 0.1 – 12.0 (Hz) 0 – 127 0 – 127 0 – 1000 (ms)Phaser Step Rate Depth ResonanceValues 4, 8, 12, 16 0.1 – 12.0 (Hz) 0 – 127 0 – 127Pitch Shifter Pitch Fine pitch Pre-delay Feedback levelValues –12 – +12 (semitone) –50 – +50 (cent) 0 – 500 (ms) 0 – 100 (%)Exciter Sensitivity Frequency — —Values 0 – 127 1.0 – 10.0 (kHz) — —De-esser Sensitivity Frequency — —Values 0 – 127 1.0 – 10.0 (kHz) — —Compressor/limiter Threshold Attack Time Release time RatioValues –60 – 0 (dB) 0 – 125 (ms) 5 – 5000 (ms) 1:64 – 64:1Effect type POD1 POD2 POD3 POD4